Monday, August 25, 2014

Video layout tour, Aug 2014


I finally got a chance to get a video of the layout.  We had another operating session the other night and while it was clean I grabbed my camera.

We start with a overview from the bottom of the stairs and then skip over to the main yard.  Leaving the yard we follow the mainline north from Alexandria, LA to Haskell, AR.  After Haskell the line ducks through the backdrop and returns to the main yard which at this point from the trains perspective is Biddle yard in Little Rock, AR.

At Haskell the lines that lead into Malvern, AR [which is the first town on the line].  In the real world the line continues west to Hot Springs. AR.  The tracks stop at Malvern due to lack of space.  At the end of the video you will see two tracks that end up against the wall.  This is suppose to be a siding, I use these to park cars on that are bound for points west of Malvern on the W&OV.











Friday, August 8, 2014

Speed matching locomotives


Not really knowing what to do and only having read about speed matching from various forums and on-line sources I was a little hesitant about pulling back the covers on DCC and getting my hands dirty with CV's.  But once I got my feet wet it wasn't near as bad as what I first thought it would be.   I have heard a lot of others complain how tough it is or how much of a pain in the ass it was, so I thought I would  attempt to explain the method that I'm using to speed match my locomotives.


Disclaimer:
Please bare in mind that this is what works for me.  In no way am I trying to imply that this is the "Best" or the "Only" way to do this. 


This has been a grey cloud that has been hanging over my head ever since our modular group switched over to DCC back in 1997.  It took me a little while just to figure out how to use my Digitrax Super Chief system.  My friend Jim, who understood it, got it hooked up, and then went away to Boot Camp for a year.  So for the most part, it just sat in the basement, hooked up to the layout.  I never used it other than to test the new locos that I had picked up over time.  It sat there like an 800lb gorilla, just teasing me.  I knew the power of it, but just didn't know how to control it.


After Jim got back and once I broke down and bought one of the DT400 throttles [and pitched the DT100's into the nearest creek], things became a lot clearer and simpler.
Slowly but surely I began to fiddle with it as the new layout came to life.  At which point I had no other choice but to learn it if I wanted things to progress.

By the time the layout became operational I had a good grasp on how the system worked.  I felt comfortable enough to start to explore the inner working, namely the CV's.  As my layout progressed so did another one of our members layout.  We were both itching to be able to run our locos in a consist without having to find ones that ran together at roughly the same speed like we had done on the modules for years.  Knowing that DCC would let us do just this, the research began in earnest.  Thank heavens for the Internet!

I quickly came to the conclusion that there are as many different ways to speed match as there are DCC systems!  But which one would work for us?

After reading about five different ways to speed match that we found on the internet, we settle on two articles that sounded the simplest.  Both articles made use of the JMRI software.  The first method used the Golden Locomotive method.  The second used an electronic device that sets over the tracks that reads the speed of the loco as it passes through two infrared beams similar to a chronometer. 

I started playing with the "Golden Loco" method so I could try and get a handle on the basic idea and the CV settings. While the Golden Loco method looked the simplest, it took a little bit of time to speed match each loco.  

Basically with the golden loco method, you get one locomotive set to run to what you think is right and looks good to your eye.  Then mark that loco and you will use it to match the rest of your fleet to it.  This is done by running both locos at the same time.  With one throttle, start the golden loco set at a certain throttle setting, then set the second throttle to the same setting as the first throttle.  You can then adjust the values of each CV of the second locomotive until it's running at or close to the same speed of the Golden locomotive.

Some folks will do this using only the Start, Mid & Max settings [CV's 2,5 & 6] while others will use the full 28/128 step speed table in conjunction with the JMRI software.

As long as this video is available, this is the one that I started out with.  While he uses an NCE system, the basic idea can be translated to any DCC system.  Since I already had the JMRI software and was somewhat familiar with it, I did not follow his instructions to a "Tee", I took his basic ideas and modified them to my likings using the 28/128 step speed table. 

The second video shows him using the JMRI program and while there are other ways of using it, he gives a good example of how some of the features work.  He does not explain it in a real detailed way, but you can get the jist of how it works.

Speed Matching #2, the Golden Locomotive method
Speed Matching #3, using JMRI overview


Along the way I encountered some problems and ran across a fellow from one of the online forums who was gracious enough to take the time and help me via emails and phone. He explained to me that the best way was to use the 28/128 speed step tables using the JMRI program.

He walked me through the program, explaining most of the major settings that I would need to make to get started and the purpose behind them.  Then he sent me a file from one of his KATO C44-9w locos so that I could flash it to one of my C44-9w's and see not only how the settings looked on screen, but also how the loco responded to these settings.  This was a great help.

He told me to keep this file saved for future reference and to use it as template for the rest of my fleet, then change necessary things to my likings and adjust the setting for each locomotive if  needed.

Two major things that he pointed out was to use a similar speed table settings for ALL of my locos and then make use of CV66 & CV95  to fine tune the speed of each loco without adjusting the speed table.  These are the Forward & Reverse trim settings.  I'll cover these later as I explain my method.

OK, here are the "Tools" that I have:

A Digitrax Super Chief  [ any Digitrax system can be used as well as other brands]
A Laptop with WinXP [Win7 can be used, I've just got WinXP]
JMRI / DecoderPro3
A LocoBuffer II USB [an interface used to connect my laptop to my DCC system]
A loop of KATO  #20-132  13-3/4" [348mm] Radius 45° curved track.  [Smaller can be used, I felt this was a decent size to allow six axle power and steamers to run smoothly]
I bought mine from Ulrichmodels. 

The reason I invested in the Speed Tunnel is because it does a great job of replacing the "Golden Locomotive" and it remains constant unlike a locomotive can as it gets broke in over time.





I won't get into how to set up and make the connections of my system as yours might be different.  I'll just try to explain how I make use of mine.

One note, I will be showing you how to setup a Digitrax decoder with a Digitrax System.  Each decoder's page will have different settings depending on what each model includes and what the manufacturer designed it with.  Thus a Digitrax decoder page will look different from what a TCS decoder page does.  I will suggest that you start with one brand and stick with it until you feel comfortable enough to delve into another brand of chip.

Some folks have said to stay with one brand of chip so that they will program the same and should have the same results.  While this can't always be done due to design of the loco [one Mfg may not have made the chip needed yet, etc, etc]  I started out using Digitrax but I plan to start using more TCS as I buy more chips.  They both have their own good points.

Once things are setup, the connection have been made and are working and you have your chip installed and programed with the basic settings: including a chip/loco number and then entered into the DecoderPro3 roster, you can begin.

This next step is very important.
Start by cleaning the track and wheels of the loco, then warm the loco up by letting it run for 5 - 10 minutes.  If the loco is new, be sure to break it in by running for 30-45 minutes as varying speeds, both forwards and reverse before attempting to match the speed.  While the loco is warming up, I usually grab a soda or make a pit stop.

Next, turn on the Accutrack Speed Tunnel.




 

Open up DecoderPro3.

On the main screen of DP3, choose "Programming On Main" in the lower right hand corner.  I was also told to set the Programming Mode to "Direct Byte".  Now choose the loco from the roster list that you're going to speed match.






I do a quick check of the settings on each tab to make sure they are still set properly.  Again, the settings you see on these screens are my choice.  You may want to explore how other settings will effect your locos.





One thing that I was told to always do, is to be sure and set the "Analog Conversion Mode" to off if you do not plan to run your locomotives on any DC layout.  He explained it to me that this way the command station and the chip have one less thing to decipher.  If you ever do need run them on a DC layout, just come back to the JMRI and change it to "ON" and write it to the chip.







I also make sure that the Acceleration & Deceleration Rate [CV3 & CV4] are set to "O" or OFF as I am speed matching my locomotives.  Once I get them programmed, I come back in and adjust momentum.





BEMF should be set to "O" or "OFF" [Digitrax: CV57 - TCS: CV61].  These can be turned back on after the speed matching is done.
However most of the things that I have read while researching speed matching is that most people leave the BEMF off if they are always running multiple units in a consist.  





A note on BEMF...

Although BEMF is a valuable feature, there may be situations in which you prefer to turn off the BEMF. 

The only time BEMF can become a problem is when running two or more engines in a consist with them all having BEMF turned on. If one of the engines runs slightly (and I mean SLIGHTLY !) slower or faster than the other, the BEMF will be constantly fighting trying to even things out.
If the second engines senses things are starting to slow (because it pushes the lead engine for a split second) it will try to increase the speed to mantain it's preset level. The lead engine feels this slight push and thinks it's starting to go too fast, and the BEMF tries to slow it down. The multiple units fighting against each other can create some not so smooth operation. This is why most guys turn BEMF off when using engines in consists.
There have been times on a Digitrax decoder where I've had to turn it back on but with only a value of 1.  I've done this so the unit responds a bit better.  I've found this to be helpful on older locomotives with a faster motor and older chips.
Again, you can always turn it on or off and play with it.  JMRI makes this very easy to do with a simple click of the mouse.
TCS has a self adjusting BEMF or it can be cut-out at a predetermined speed.  You can read more about TCS's BEMF and Dither control here.

If everything is set to the way you want then you can begin.

On the Speed Table screen, I set the first slider [or CV67] to 30 and set [CV94] to 140.  Next I click on "Log Curve".  This will set the speed table so it looks like this




I chose the "Log Curve" so the throttle has a quicker response at the lower speeds [this covers 0% to 49% of the throttle] and slower response at the higher speeds.



I start with the loco running in the FORWARD direction , I set the start speed first.  I turn the throttle to 1%, if it does not start moving, I simply increase the slider for speed step 1 or CV 67 by a value of 5 until it begins to crawl at a speed to my liking.  Another thing I might do is to adjust CV65 [The kick start value which can be found on the "MOTOR" tab or page] which gives the motor a little extra shot of voltage to help start the motor turning if the unit is an older unit or fairly new and still a little stiff.  Normally a value of 2 is sufficient for most locos.

Second, I turn the throttle to full speed or 99% and see what speed the Accutrack reads.  If it's not at the 68-70 smph then I adjust the Forward trim [Cv66] up or down until the desired speed is reached or close to it.

Third, I turn the throttle down to half speed or 49% and check the Accutrack for the speed.  This should be around 58-60 smph. 

Fourth, I turn the throttle down to 25%, the speed should be around 38-40 smph.

Fifth, I turn the throttle down to 12%, the speed should read around 20-22 smph.

I'm simply trying to get close to the setting that I want by doing it this way, it's very similar to using the Start, Mid & Max settings.

But by using the full speed table I can now start fine tuning the locos speed.  If you want your locos to run faster or slower, simply adjust the over all Log Curve" by using the Forward and Reverse trims.

This is where CV66 and CV95 comes into play.  If the speed is too fast or too slow you can change the value of that CV to raise or lower the speed.  But note this, CV66 & CV95 will effectively raise or lower the entire speed table [CV67 -CV94] as a whole, not each individual CV or slider.

Values that can be entered into CV66 and CV95 range from 0 to 255.  Halfway point is 128.  Any value under 128 will slow the speed down, any value over 128 will increase the speed.   
You can change the CV value by a value of "1" if needed and sometimes it will make a difference, most of the time I change the value by 5 or 10 until I zero in on the speed.   Once you have the locomotive running close to what you prefer, then change direction and repeat the process.



I have heard and found out for myself that very seldom does a locomotive run the same speed in both the forward and reverse direction.  For that matter, even the same make and model will sometimes not run at the same speed right from the factory.  By having a separate trim CV for both the Forward and Reverse direction, makes it very handy to get the speeds match in both directions.

At the time I wrote this up, I know that some chips do not have both CV's available.  Both Digitrax and TCS does, while NCE chips do not.  One reason why I stick with Digitrax and TCS for my chips.  I'm sure there are other brands of chips that have both, but I'm not familiar with them.


I came up with these speeds by setting my golden loco to speeds that I thought looked pleasing to my eyes.  After getting the Accutrack tunnel I ran the loco through it to see what the Speed Tunnel showed for speed at each throttle setting and then wrote them down and taped them to the speed tunnel for reference.

Throttle settings;
99% = 70 smph
49% = 58 smph
25% = 40 smph
12%  = 22 smph 





Again this is what I felt was right to me, feel free to change them for your needs.



A few side notes...

For awhile I also struggled with getting the speeds to match at each of the four throttle settings.  Sometimes I could keep the speeds matched at 12% and 25%, but at the settings of 49% and 99% they would be higher  than what I had on the chart, other times they were lower.

After getting a good batch of my locos speed matched and running them in a few operating sessions, I found that I would normally run my trains at about 15% of the throttle setting [or speeds of 20 smph max] and very rarely ran at speeds higher than 25%.  It then occurred to me that as long as I can keep the speeds matched close at the 12% to 25% range then things should be OK.  If they ran a little different at higher speeds they would not be as noticeable because of two things; One, I don't run them that fast and two, several things come into play at the higher speeds.  The slower running locos will keep the faster locos at bay because they run slower and, the weight of the train will tend to even out the locos.  When I say they run faster, it's not by much but you can see the difference if you were to uncouple them.  The faster ones would pull away but not at a rockets pace.

Another thing I noticed was that even though two locos may not be matched perfectly, once they get running they seem to run very well together, at least one isn't spinning it's wheel and the other isn't being drug along behind the first one.  You may notice the couplers may bunch or stretch as the units are running.  This may be very apparent when the consist starts to move from a stand still.  You will see the faster locos start a little quicker than some of the others, but soon the others will begin to move as well and then even out.  This where and why I add just a bit of momentum, it helps to diminish the bucking and jerking at start up.

If you watch the prototypes, you will see this action as well.  GE units use to start at a slower pace than say EMD's, you would see the units buck and jerk as they begin to move, but once they're moving they would tend even out.

 
After matching a number of locos and actually running them in consists in several operating sessions I have come to the conclusion that speed matching is not Rocket science.  The term "Close is Close enough" really applies here. 



Once you get a few locos under your belt you'll become familiar with what setting you'll need to change and how much to change each value.  It just takes a little playing with. Then you should be able to match the speeds of your locomotives faster than what time it took you to read this novel.  If everything goes as planned, I can usually have a locomotive matched for speeds in about 15-20 minutes.

I hope this helps out?







Tuesday, August 5, 2014

Something Old, part 2


After several weeks of decending to the laboratory, I have finally finished my Time Machine!

Several years ago I finally got around to getting brave enough to pull out the mill and I milled out a couple of Life Like FA's so I could install some DZ125's.  These are probably one of my favorite Rock Island locomotives and so badly wanted to add them to my fleet.  I still have plans for another set of the Red and Black FA's as well as a set  of Maroon Fa's.  Not sure if I'll go through the hassle of milling my own or break down and get some pre-milled frames from Aztec.

Once getting them done a fever came over me and I felt I needed to get some of the other older Rock Island locos up and running.  That fever came on strong again when KATO announced their newest locos several months ago.  Their F2's, and when I seen they were releasing them in the Red and Black Rock Island scheme, how could I resist?

I quickly ordered a pair and before they arrived, I dug out the two pairs of FT's I had and started chipping them, then I got after my F7 A&B's.  When the F2's arrived I got them chipped and continued until I had most of my Red & Black and a few of the Maroon with striped units done.

Tonight I finished up my last loco for now, a Rock Island RS1 in Black with Red oval logo.

As of this blog post I now have the following chipped, speed matched and ready for service;
Two sets of Intermountain FT's
A single A and an ABBA set of Intermountain F7's
A Life Like set of AB FA's
A pair of KATO F2's
One Atlas RS1
Three Atlas RS3's, two Maroon with white Stripes, one Red and Black with White wings
Two Atlas GP7tt's
One Atlas H15-44

These along with the other units that I have in the Maroon variations should be enough to back date the layout from time to time for an ops session dated in the late 50's to early 60's

But not sure if I will swap out the cars to match?  Have to wait and see?







I've got a whole lot of weathering to do now.....







Wednesday, July 30, 2014

And now for something completely different!


Last weekend I had the pleasure to see and operate a beautiful HOn3 layout.

A buddy that I met back in 1994 or so, Judon Jones, invited our group to bring our Bend Track modules to Manhattan, KS and setup at their yearly Mall show with them.

Jud had several HO modules that he had built as a self contained HOn3 layout over the mainlines of the HO modules.  As time pasted he split away from the group and modified these modules as self contained layout which he and a another good friend of mine, Jim Hoover, would haul around to different shows and to several of the national Narrow Gauge Conventions.  Jim and Jud became fast friends as they both enjoyed Narrow Gauge railroading.  Jud was HOn3 and Jim was starting to get his feet with Nn3.

Several years ago while hauling them to one of our local meets, his modules were almost completely destroyed when his trailer suffered a catastrophic accident.   After a few years, he decided it was time to build the layout that he'd been dreaming about for years, and built he did!  He salvage what he could from the modules and came up with the rest.

He'd been wanting me to come down and see it for the last couple of years and I finally found the time to do so, and I'm glad I did.

I wish I had taken my tripod and camera along, but at least I took my iPhone with me, the next time I will.  I did get a bunch of videos and pics that I'd like to share with you today.  Please for give the quality of the videos and pics. 

The details
The main layout is supported by base cabinets that Jud built in place.  These serve as both storage and support for the layout.  The frame work is built with box construction or open girder construction and can be dismantled with ease should the need arise, complete with instructions for the dismantling.  The sub roadbed is supported with risers.

The track is mainly laid with flex track complemented with sections of hand laid track in a few location.  The turnout are all hand built.

Jud chose to go with Digitrax for the DCC system which is radio equipped.
The locomotives consist of mainly Blackstone models and few brass locos, all of which are equipped with Tsunami Sound chips.  Most of the rolling stock are either kits or scratch built and are also equipped with Blackstone trucks and wheel sets.

All 27 turnouts are powered with stall motors and are controlled with DCC as well.

The Story of the layout
The entire layout is fictitious.  It's modeled in the modern day, but before SP and Uncle Borg took over the Rio Grande, and was built using antique equipment, and is patterned and operated much like the Cumbres and Toltec RR.That is say it not only does it earn it's keep, it's also a living museum.

The idea was to build a road from scratch starting in LeVeta, CO and running up to the town of Cuchara, CO 12 miles away to serve several gold and ore mines, oil wells and livestock as well as provide passenger service for both the locals and tourists.

Here is an over view of the entire layout.  It takes up an area of about 16' x 20', give or take a bit.
LeVeta is in the foreground and Cuchara is on the higher peninsula on the right.





A shot of the proud owner




 Several views of  LeVeta, CO








Shots along the grade in sequence












Views of Cuchara, CO







I also took several videos that I put together to make these two videos as well.  In the first one we'll follow along as #453 assaults the 2% grade from LeVeta to Cuchara.  The second we'll chase it back downgrade from Cuchara to LeVeta.  Keep an eye open and watch for the foamers. 



                          





                          




A special thanks to Judson

For those of you who didn't know Jim, he and Jud became very good friends as they shared their love for Narrow Gauge railroading. As a result Jud felt compelled to keep Jim involved with the hobby and his life.  He couldn't wait to show me this special part of the layout.



Jim played and integral part of Jud's layout even though Jim never got to see this layout as he passed away before Jud started the construction.  Jim not only helped Jud with his old modular setup, repairing locos and helping out with the different shows that they attended, Jim also introduce Jud to DCC and sound!!!


   September 23, 2008   





Monday, June 23, 2014

Pool power!


It's been a long time since I made it up to Biddle yard.  I had to run up to get some supplies the other day so I grabbed the camera just in case, glad I did.
Just as I drove past the fuel racks,  the hostelers were hanging the blue flags on these units. 







With any luck I might see these rolling through El Dorado shortly.  I've seen a few SP units on the Little Rock Line a time or two, but never any Grande units.  Sure hope they make their way south?

With the pending MoPac/WP/Yellow Plague merger, I sure hope these two roads never come under the cross hairs?  What a shame that would be...


*****


I finally scored a couple of cheap DCC ready chassis so I could swap out the older DC versions under the SP units.  This saved me a little time from having to use the TCS CN-GP decoders on them, not that they're hard to install.

The Grande SD45 is one of the newer DCC ready chassis that just needed a chip.  





Monday, June 9, 2014

Something Old


Been busy enough that I haven't had much time to get any large projects worked on, but I found a little time to get some locos chipped and running.  I'm expecting a pair of the new KATO F2's shortly and thought I'd get a few of my other older units ready to run by them time they arrive.

Here's a quick video of an A-B-A lash-up of  and FT A/B set with a F7 trailing in the Black & Red scheme on a Caboose hop through Fordyce, AR.









Tuesday, April 29, 2014

Trains of The Little Rock Line


I have had some questions about the cars that were left behind on the junction in the video from the previous post.  So I figured a good way to answer the questions was just to go through all the trains that run during a typical session.

I've thrown my modelers license on the table and renamed and renumbered the trains from what actually ran on the Little Rock line.  I did this so they would be easier to remember during a session for those who do not know much about the line or have a hard time keeping things straight, myself included.

There are two locals or turns that are the stars of the layout.  These both originate out of the yard at El Dorado, AR.  One works North and returns in the same session, the other works South and returns in the same session.  90% of the work on the layout is done by these two trains.

The Winnfield Turn
It leaves El Dorado Southbound and works the towns of Dubach, LA. Ruston, LA. and finishes up at Winnfield, LA. then returns to El Dorado.  The train only works trailing point turnouts so it does work in both directions.

Dubach, LA
Piggly Wiggly Distribution - A grocery chain in the south.  Boxcars, insulated boxcars & mechanical reefers.
A&A Cement Works - 2 bay cement hoppers and open hoppers.
ARKLA Distributing - A plastic pellet company  -  4 bay covered hoppers. The turn will work ARKLA on the return trip

Ruston, LA
An interchange with the ICG - Tank cars and pulpwood cars.
Cars from the turn are dropped off on the way to Winnfield and the outbound cars from the ICG that are bound for El Dorado will be picked up on the return trip.

Winnfield, LA
Union Scrap - Gondolas
 While in Winnfield, there are several older boxcars that need to have their journal boxes or bearings exercised so they don't freeze up from just sitting there unused.  So the turn has standing orders to move the last car to the the front of the string and then replaces the cars to the end of track.  This is a move that Quin came up with after volunteering on a local short line where they had to do the same thing.  It's  unique and interesting operation that isn't often modeled.

The Haskell Turn
It leaves El Dorado Northbound and works the towns of  Calion, AR. Fordyce, AR and Haskell, AR. then returns to El Dorado.  The train only works trailing point turnouts so it does work in both directions.

Calion, AR
Calion Lumber Company - All door boxcars, boxcars, bulkhead flatcars, GSC flatcars and centerbeam flatcars.  The turn will work Calion on the return trip.

Fordyce, AR
Dixie Woodworks - Boxcars and All Door boxcars.
Flappers - A chicken processing plant much like Tysons - Mechanical reefers, tank cars and livestock cars - the reefers will be worked on the return trip.  Loaded livestock cars that are dropped by the Shrimper will be picked up as empties by the Haskell turn on it's return trip.

Haskell, AR
Riceland Mill and Elevator - 3 bay grain hoppers and air slide hoppers.

The Four Manifests
LRMP-W, MPLR-W
MPLR-H, LRMP-H

LRMP - Little Rock to the Missouri Pacific [Alexandria., LA]
MPLR - Missouri Pacific [Alexandria., LA] to Little Rock
These four trains deliver the cars to El Dorado from the main yard. 
The "W" designates it has cars for the Winnfield turn & the W&OV.
The "H" designates it has cars for the Haskell turn and also cars bound for the industries at El Dorado.
These four trains come from the main yard, but leave it from different direction so they enter the layout as a Northbound or Southbound.  After making their runs they return to the main yard, to the same track they left from so they're staged and ready for the next session. 
The "W" trains runs before "H" trains do.

Through trains
There are eight through trains that make an appearance on the layout during the session.
MKT coal train
CNW Intermodel
MoPac Freight
SBD Auto rack
RI Frieght
RI Grain train
Amtrak's Rebel - Makes one stop in El Dorado.
The Shrimper - This is a Redball intermodel, the hottest train on the line.  It's a Refrigerated intermodel that hauls frozen seafood to points north, however on the layout it runs as a southbound empty.  To retain the Redball classification, it will deliver loaded livestock cars of chickens to the Flappers facility in Fordyce, AR. It's the only stop on the line that this train makes.

These eight trains come from the main yard, but leave it from different direction so they enter the layout as a Northbound or Southbound.  After making their runs they return to the yard, to the same track they left from so they're staged and ready for the next session just like the four manifests do.

In due time some of these trains will change from what is listed above to Rock Island trains as I get new locos chipped and/or painted in Rock Island colors.  The CNW, MKT and Amtrak will stay on the schedule as they have trackage rights from helping to fund the track revitalization.  For some variety from time to time I can swap out the power of some of the trains so I can say they are detour trains. 

The Illinois Central Gulf
It runs at the same time as the Winnfield turn does so they can meet at Ruston, LA.  Cars from the ICG are bound for or from the W&OV in the town of Malvern.  The Winnfield turn just delivers them to El Dorado where the W&OV picks them up.

Riceland Industries
The plant switcher pulls the cars and spots them at the beginning of each session for the Haskell turn.  After the Haskell turn is done working at Haskell, the switcher will spot the new cars that Haskell turn dropped off.

The W&OV  [Warren & Ouchita Valley RR]
The W&OV crew gathers up the outbound cars from the industries in Malvern, AR.  Once their train [The Razorback] is made up they will deliver them to El Dorado [via Rock Island trackage], exchange the cars and return to Malvern with their string of fresh cars. 

All in all there are a total of 17 trains that run per session.  In some of the session all the work wasn't done, so we have started over with the through trains until the last job is done.  A normal session will last between 3 1/2 to 4 hrs.

I've also added a link to a picture of the layout plan and a schematic, you can find it on the right hand column just below the layout overview.  
I hope this helps to explain things a bit better?